Patch Cords are a type of optical fiber cable that comes with pre-terminated connectors at both ends. The connectors terminated at both ends can be of the same type (LC-LC or SC-SC) or can be of different types (LC-SC) basis the application. These patch cords are typically LSZH jacketed and are available in different fiber counts with different fiber types. Simplex patch cords come with 1 fiber count whereas duplex comes with 2 fiber counts and we can have patch cords with multiple fiber counts too. These patch cords come in different colors and are typically used to cross-connect patch panel to patch panel.
Pigtails are a type of optical fiber cable that comes with a pre-terminated connector at one end only and the other end is ready for splicing to another fiber. The pre-terminated connector can be of male or female type and can be used to cross-connect with another patch panel. The other end of the pig tail is bare open and can be spliced to another fiber for extending the connectivity. These pigtails are usually unjacketed in order to be spliced and then protected in a fiber splice tray with a mechanical or thermal splice joint protector.
- IEC Grade B standard
- IEC Grade A quality is available on request
- Qualified to Telcordia GR326 and IEC 61300 standards
- RoHS compliant materials
- Ultra polish (UPC) and - Angle polish (APC) available
- Available in single mode G.652.D, G.657.A1, or G.657.A2, and multimode OM1, OM2, OM3, or OM4.
- Simplex and Duplex available, with 1.6m, 2mm or 3mm diameter.
- Pigtails available as sets in 2, 4, 6, or 8 colors.
- Connector options include SC, LC, FC, ST, MU, and E2000.
- Various sheath colors are available.
- Pulls tab, and short boot options available.
- Its Low Smoke Zero Halogen (LSZH) flame-resistant jacket that doesn't emit toxic fumes even if it burns
STL ARMOR-LITE Multitube Double Jacket Steel Tape Armored Cables are suitable for direct burial as well as for duct applications. A corrugated steel tape armor surrounds the cable core with thermoplastic jacket placed over the armor layer making the cable robust and installation friendly.
STL ARMOR-LITE Gel Free Multitube Single Jacket Steel Tape Armored Cables are suitable for direct burial as well as for duct applications. A Corrugated Steel Tape armor surrounds the cable core with a thermoplastic jacket placed over the armor layer making the cable robust and installation friendly.
STL DUCT-LITE Gel-Free Multitube Fiber Optic Cables are suitable for duct applications. DUCT–LITE comes with gel-free technology, the buffer tubes contain water-swellable yarns, and the cable core is surrounded with water-swellable tape to prevent water ingress in the cable. The cable core is surrounded with thermoplastic sheath making the cable robust and installation friendly.
