STL Bow Lite Plus 250 Optical Fibre
STL Bow-Lite Plus 250 Single Mode Optical Fibre is an optical fibre with low bend sensitivity and zero water peak
attenuation.
STL Bow-Lite Plus 250 Single Mode Optical Fibre is an optical fibre with low bend sensitivity and zero water peak
attenuation.
STL Bow-Lite 250 Single Mode Optical Fibre is an optical fibre with low bend sensitivity and zero water peak
attenuation.
The OPTO-BLAZE Terminal system is a device needed in the access network to quickly connect the Fiber Distribution Hub with subscribers.
STL Bow-Lite 200 Single Mode Optical Fibre is a reduced coating diameter optical fibre with low bend sensitivity and low water peak attenuation.
STL Unitube Outside Plant, Single Jacket with Glass Roving Yarns Fibre Optic Cables are suitable for installation in
conventional ducts by means of pulling or air-blowing techniques. These cables are based a loose tube structure with
optical fibres placed inside a robust central buffer tube.
STL Atlas Lite Out-Side Plant Fibre Optic Cable is generally used in the drop section of FTTx networks based on
micro-ducts. Zhey feature light weight and small diameter and are designed for optimum blowing performances in
single or bundled 7/4mm and 10/6mm micro-ducts.
STL Unitube Out-Side Plant, Single Jacket with Glass Roving Yarns Fibre Optic Cables are suitable for installation in
conventional ducts by means of pulling techniques. These cables are based on a loose tube structure with the optical
fibres placed inside a robust central buffer tube.
STL Micro-LITE Multitube Single Jacket Fibre Optic Cables are typically used in micro duct or aerial drop installation
applications. This cable is a stranded micro loose tube cable with optical Fibre placed inside robust buffer tubes
stranded around a Fibre reinforced plastic (FRP) central strength member. In addition to optical Fibres, the buffer
tubes contain water blocking gel to prevent water ingress in the cable
STL Duct-LITE Indoor/Outdoor, Single Jacket with Glass Roving Yarns Fibre Optic Cables are suitable for installation in conventional ducts by means of pulling techniques.
STL Duct-LITE Out-Side Plant, Single Jacket with Glass Roving Yarns Fibre Optic Cables are suitable for installation in conventional ducts by means of pulling or air-blowing techniques. These cables are based on a loose tube structure with optical fibres placed inside robust buffer tubes stranded around a fibre-glass reinforced plastic (FRP) central strength member
